Step 1

FAST LAVEX which it was looking forward to reached.

Step 2

At once, it tries to open packing.

Step 3

Let's read a manual well. (A manual is written in Japanese.)

Step 4

Side panels are taken out.

Step 5

You examine a part.

Step 6

You confirm a middle frame, and see the position of the hole well, and tighten a screw.

Step 7

The bottom frame is assembled. One by one, let's assemble it securely.

Step 8

The frame of aluminum is good because it is light even if it is lifted.

Step 9

A board with the logo of FAST LANEX was assembled.

Step 10

The next is put up, and it works.

Step 11

An upper frame is assembled. The corner of the upper frame is round design.

Step 12

It takes shape.

Step 13

The next puts a vertical frame.

Step 14

Covers are put on the corner.

Step 15

Casters are put on the frame.

Step 16

The screw stuck on the caster is tightened firmly. Important!

Step 17

A pole is put in the center.

Step 18

Fit a glass into the upper frame. Be careful of glass handling!

Step 19

Fit a glass into the side frame.

Step 20

You fix glass with the part.

Step 21

Shelf boards are put at long last.

Step 22

The interval of the shelf board is decided freely.

Step 23

All shelf boards were put. Then, all glass is put.

Step 24

FASTLANEX is carried, and a casters are fixed.

Step 25

You display it brilliantly.

Step 26 Completion!

When a charged option is purchased, the rear can be made a mirror, and shelf boards can be increased. As soon as you devise it, many collections can be displayed.